A well-seasoned cast iron tawa makes crisp dosas and soft, evenly spotted rotis, and it lasts for decades. Seasoning is simply a thin layer of oil baked onto the iron until it hardens into a slick, protective coat. Here’s how to build it, keep it and fix it.
How to season a new tawa or kadai
- Wash it once with warm water and a little soap to remove the factory coating, then dry it completely on the flame.
- Oil it thinly. While warm, rub a very thin layer of oil all over, including the back and handles, with a cloth or paper towel. Wipe off the excess; it should look almost dry.
- Heat until it smokes. Keep it on medium-high flame until it smokes and the oil darkens, about 5 to 10 minutes. Open a window and turn on the chimney.
- Cool and repeat 3 to 4 times. Each layer builds the coating.
- Start with oily cooking. For the first few uses, make parathas, onion uttapam or shallow-fried tikkis rather than plain dosas or rotis.
Daily care
- Wash while warm with hot water and a brush. Use a little mild soap only when needed.
- Dry on the flame straight after washing. Water left on cast iron causes rust.
- Oil lightly while it’s still warm, and store it in a dry place.
- Avoid soaking it in water or leaving tamarind or tomato dishes in a cast iron kadai for long.
How to remove rust
- Scrub the rust off with steel wool or a scrubber and a paste of salt and a little oil.
- For stubborn rust, wipe with equal parts vinegar and water, leave it for 15 to 30 minutes (no longer), then scrub again.
- Rinse, dry completely on the flame and season it again from step 2 above.
Why are my dosas sticking?
- The tawa isn’t hot enough. Sprinkle water: it should sizzle and evaporate at once.
- The seasoning is thin. Season it a few more times and cook oily food for a week.
- Wipe with a cut onion dipped in oil between dosas. It’s an old trick that helps.
Still choosing a tawa? Compare cast iron vs nonstick tawa, see the best tawas and the best kadais in India.
